Layer Functions Section - Barco PresentationPRO-II User Manual

2. Hardware Orientation
i~óÉê=cìåÅíáçåë=pÉÅíáçå
The figure below illustrates the Layer Functions Section .
BG/DSK PIP
Figure 2-5. Layer Functions Section
The buttons in the Layer Functions Section enable you to control the layers and effects
that transition to and from Program.
Please note the following important points:
•
•
•
Following are descriptions of each button's function.
Background/DSK Button — press to pend either a Background or a DSK transition,
depending on how the button's mode is configured (on the BG/DSK Input Setup Menu ).
BG/DSK The button blinks when selected, and the BG/DSK Input Setup Menu appears on the
Touch Screen. In Chapter 4, refer to the "
on page 74 for details.
PIP — press to pend a PIP transition or modify the active PIP. The button blinks when
selected, and the PIP Adjustment Menu appears on the Touch Screen. In Chapter 4,
PIP refer to the "
KEY — press to pend a Key transition or modify the active Key. The button blinks when
selected, and the Key Adjustment Menu appears on the Touch Screen. In Chapter 4,
KEY
refer to the "
with Layers
PresentationPRO-II • User's Guide
FULL
KEY LOGO
SCREEN
Layer Functions
The buttons are arranged from left-to-right in order of visual priority — from the
background (at the lowest priority) to the LOGO (at the highest visual priority).
The PresentationPRO-II system enables you to "pend" one transition at a time,
such as a PIP or Key transition, a background, DSK or LOGO transition, or a
"clear" function.
Because the mixer has a single scaler, you cannot transition a PIP and a Key
simultaneously. With a PIP on Program, however, you can "pend" a Key. When
TRANS is pressed, the PIP transitions off and the Key transitions on. Similarly, if
a Key is on Program, you can pend a PIP.
Note Remember that a live Background and the DSK are mutually
exclusive. This occurs because the BG/DSK Input is shared.
PIP Adjustment Menu
Key Menu " section on page 65 for details. In Chapter 6, refer to the "
" section on page 102 for complete instructions on all PIP and key modes.
CLEAR FREEZE
Background/DSK Input Setup Menu
" section on page 57 for details.
Front Panel Sections
RESET TRANS
" section
Working
19