Table of Contents
Advertisement
10. Note the status of the Local Area Connection, as shown below.
Figure C-5. Network and Dial-up Connections Window (sample)
Figure C-6. Local Area Connection Properties Window (sample)
11. Ensure that the Internet Protocol (TCP/IP) check box is checked.
12. Click the Internet Protocol (TCP/IP) line to highlight it, then click the Properties
PresentationPRO-II • User's Guide
~
If the status is " disabled ," contact your network administrator.
~
If the status is " enabled ," right click on the Local Area Connection label
and select Properties from the pop-up menu.
The Local Area Connection Properties Window appears:
button to display the Internet Protocol (TCP/IP) Properties Dialog .
`K==réÖê~ÇáåÖ=pçÑíï~êÉ
Ethernet Upgrade Method
141
Advertisement
Table of Contents
