Table of Contents
Advertisement
6. Operations
Working with Layers
oÉãçîáåÖ=~=hÉó=Ñêçã=mêçÖê~ã
Use the following steps to remove a Key from Program:
1.
CLEAR
2.
3.
4.
`~åÅÉääáåÖ=~=hÉó=qê~åëáíáçå
Use the following steps to cancel a Key transition.
1.
`Ü~åÖáåÖ=~=hbv=íç=~=mfm
Use the following steps to change a Key to a PIP.
1.
2.
3.
4.
5.
106
Ensure that you have preset the desired transition type and rate. Refer to the
"
Working with Transitions
In the Layer Functions Section , ensure that the KEY button is blinking. If not,
press Key to display the Key Adjustment Menu . On the Source Selection Bus ,
the source associated with the Key will be lit solid.
In the Layer Functions Section , press CLEAR to "pend" the removal of the Key.
The CLEAR button will blink to indicate that the operation is pending.
In the Layer Functions Section , press TRANS . The TRANS button lights during
the interval, and at the conclusion of the transition, the Home Menu appears.
Assumption : A Key transition has been selected, and the KEY button is
blinking.
In the Layer Functions Section , press KEY . The button stops blinking, and the
pending transition is cancelled. Please note:
~
If there is no source currently on Program, the KEY button turns off.
~
If there is a source currently on Program, the KEY button stops blinking
but remains lit.
Assumption : A Key is currently on Program.
Ensure that you have preset the desired transition type and rate. Refer to the
"
Working with Transitions
In the Layer Functions Section , press PIP . Please note:
~
The PIP button blinks and the KEY button remains lit solid.
~
The PIP Adjustment Menu appears, and the source associated with the
Key lights solid on the Source Selection Bus .
If desired, select a new PIP source on the Source Selection Bus . The pending
source blinks and the current Key source remains lit solid.
Note
If you do not select a new source, the current source will be
used. It will transition off as a Key, and back on as a PIP.
In the Layer Functions Section , press TRANS . The current Key transitions off
and the new PIP transitions on. The TRANS button lights during the interval.
Adjust the new PIP's size, position, border, shadow, source image, cropping and
"special effects" as desired. Refer to the "
for details.
" section on page 115 for details.
" section on page 115 for details.
Modifying PIPs
PresentationPRO-II • User's Guide
" section on page 104
Advertisement
Table of Contents
