Table of Contents
Advertisement
4. Menu Orientation
bafa=asf=fåéìí=cçêã~í=jÉåì
From the System Menu , press { EDID } to display the EDID DVI Input Format Menu , a
sample of which is shown below.
H
O
M
E
B
A
C
K
Figure 4-23. EDID DVI Input Format Menu (sample)
The EDID DVI Input Format Menu enables you to update the system's preferred EDID
resolution for the BG/DSK input.
Extended Display Identification Data (EDID) is a VESA standard data format that contains
information about a display device and its resolution capabilities, both preferred and
allowed. The PresentationPRO-II EDID file is stored in non-volatile memory. This file is
read by an external computer's DVI graphic card when the DVI output is connected to the
PresentationPRO-II's BG/DSK input connector during boot-up.
•
•
•
PresentationPRO-II • User's Guide
EDID DVI Input Format
Format
Current:
To change EDID for BG/DSK,
select the desired format
and select Program EDID.
Note
This menu is designed for advanced users only. Do not
program the EDID unless it is necessary.
Format — select the preferred DVI video format with which you want to program
the PresentationPRO-II's EDID non-volatile memory
Current — displays the current EDID video format that resides in memory.
Press { PROGRAM EDID } to program EDID with the new selected format. A
warning message will be shown.
Note
Once EDID programming is complete on PresentationPRO-II,
you will be prompted to power down the external computer,
power it back on again, and then ensure that the computer's
format is set to match.
1280 x 1024 @ 60
[ 1280 x 1024 @ 60 ]
PROGRAM
EDID
System Menu
A
D
J
51
Advertisement
Table of Contents
