Table of Contents
Advertisement
13. It takes approximately 6 minutes to load the flash memory using the Serial
14. Cycle power on the PresentationPRO-II unit, and exit the Flash Loader utility.
15. On PresentationPRO-II, perform a factory reset.
16. On PresentationPRO-II, verify that the new software has been loaded correctly:
bíÜÉêåÉí=réÖê~ÇÉ=jÉíÜçÇ
Use the following steps to upgrade PresentationPRO-II software using an Ethernet
connection to your PC:
1.
2.
3.
4.
PresentationPRO-II • User's Guide
method. When complete, the Flash Loader utility displays the " Upload
Complete " message. Click OK to continue.
Warning
Use caution when performing this step, as all saved files and
saved still frames will be erased.
a.
From the Home Menu , press { SYSTEM } to access the System Menu .
b.
From the System Menu , press { RESET } to display the Reset Menu .
c.
On the Reset Type line, select FACTORY .
d.
Press { RESET }. When the confirmation screen appears, press { YES } to
reset the system to factory default values.
a.
From the Home Menu , press { SYSTEM } to access the System Menu .
b.
From the System Menu , press { SW VER } to display the Software
Version Menu , then verify the new version.
Ensure that your PC (or laptop) uses the Windows
systems.
Ensure that your PC (or laptop) has RS-232 Serial Terminal software installed,
such as HyperTerminal . This software enables the PC to send serial commands
to the PresentationPRO-II unit.
Please note the following important points:
~
Do not connect PresentationPRO-II to a Local Area Network (LAN) with
an existing DHCP server running.
~
The factory default IP address for the PresentationPRO-II system is
192.168.0.10 , so the PC will use 192.168.0.191 as its IP address.
Download the latest PresentationPRO-II firmware update from the web:
a.
On the web, navigate to
b.
Click " Downloads " to access the Downloads Page .
c.
Using the " Select Video Product " pull-down menu, click
PresentationPRO-II.
d.
In the " Software " section, click the Download button for the latest
version of code.
e.
When the File Download Dialog appears, click Save to save the file to
your computer.
`K==réÖê~ÇáåÖ=pçÑíï~êÉ
Ethernet Upgrade Method
®
2000 or XP operating
http://video.folsom.com
.
139
Advertisement
Table of Contents
