Table of Contents
Advertisement
6. Operations
jçÇáÑóáåÖ=hÉóë=~åÇ=aphë
Use the following steps to modify a Key or DSK:
1.
2.
3.
4.
5.
6.
7.
8.
9.
PresentationPRO-II • User's Guide
Assumption : A Key (or DSK) is currently on Program.
Use one of two methods to access the key adjustment menus:
~
For a
Key
— In the Layer Functions Section , press KEY to activate the
current Key for modification. The Key Menu appears.
~
For a
DSK
— Press BG/DSK to display the BG/DSK Input Setup Menu
appears. Then press { KEY } to display the DSK Adjustment Menu .
Clip, Gain, Mode, Opacity
and opacity. In Chapter 4:
~
Refer to the "
Key Menu Description
~
Refer to the "
DSK Adjustment Menu
Note
Because the Key is on Program, it is recommended that you
make slow, smooth adjustments during a live production.
Fill Source
— Use the controls in the Key Menu to select a self or matte fill key.
If Matte is selected, press { MATTE } to display the Matte Menu , with which you
can choose the matte fill color. In Chapter 4, refer to the "
on page 68 for menu details.
For a
Key
only:
Size and Position
— From the Key Menu , press { SIZE & POS } to display the
Key Adjustment Menu . Use the controls to size and position the Key. In
Chapter 4, see the "
Key Adjustment Menu
Crop
— From the Key Menu , press { CROP } to display the Crop Adjustment
Menu . Use the menu to select the type of crop, the aspect ratio, and the image's
H and V size. In Chapter 4, refer to the "
menu details.
Source Size
— From the Crop Menu , press { SRC } to display the Key Source
Adjustment Menu . Use the menu to adjust the source image's size and position
within the PIP. In Chapter 4, refer to the "
Description
" section on page 72 for menu details.
Special Effects
— From the Matte Menu , press { EFX } to display the Image
Effects Menu . Use the menu to select monochrome or color mode, to modify
chroma and hue, to invert the color, and to set a strobe effect. In Chapter 4, refer
to the "
Image Effects Menu
Global Functions
— Remember that the following global functions are always
available to you:
~
Press Reset to reset the current effect to a default value.
~
(For a
Key
only) Press Full Screen to bring the Key to full screen, using
the source's height as the defining factor.
~
Press Freeze to freeze the Key. Press again to unfreeze.
For a
Key
and a
DSK
Transition
— Transition the new "look" to program with a MIX or WIPE . Refer to
the "
Working with Transitions
— Use the controls to adjust clip, gain, invert mode
" section on page 66.
" section on page 78.
" section on page 69 for menu details.
Crop Menu
Input Source Adjustment Menu
" section on page 63 for menu details.
:
" section on page 115 for details.
Working with Layers
Matte Menu
" section
" section on page 61 for
107
Advertisement
Table of Contents
