Barco PresentationPRO-II User Manual page 46

4. Menu Orientation
Input Menu
In this situation, the following actions are recommended:
•
•
•
fåéìí=`çåÑáÖìê~íáçå=jÉåì
From the Input Menu , press { CFG } to display the Input Configuration Menu , a sample of
which is shown below:
H
O
M
E
B
A
C
K
Figure 4-6. Input Configuration Menu (sample)
Each input has an associated input file that stores all input parameters and settings. Each
time an input is selected in the Source Selection Bus , its associated file is recalled.
The Input Configuration Menu enables you to save the input's associated file — which
guarantees that the exact parameters you set are those that are used on air.
The following functions are provided:
•
•
•
•
34
Check all cable connections for the selected input.
With a connection established, press { FORCE ACQUIRE } to perform the optimum
image setup and automatically display the Input Menu , or ...
Press { INPUT } to display the Input Menu without performing a FORCE
ACQUIRE .
INPUT CONFIGURATION
File Number
File Name
SAVE DELETE
File Number — sets the file number into which data is stored. In the current
version, the file number automatically defaults to the input number and cannot be
changed.
File Name — sets the alphanumeric file name. In the current version, the file
name automatically defaults to the input name and cannot be changed.
Press { SAVE } to save the selected input in the designated input file.
Press { DELETE } to delete the selected input file.
SRC_3
[ 3 ]
N
A
[ IFILE_003 ] V
A
D
J
PresentationPRO-II • User's Guide