Settings Menu - Barco PresentationPRO-II User Manual

4. Menu Orientation
Output Menu
lìíéìí=jÉåì=aÉëÅêáéíáçå
The figure below illustrates a sample Output Menu :
H
O
M
E
S
A
V
E
Figure 4-12. Output Menu (sample)
The Output Menu enables you to configure PresentationPRO-II's outputs, including the
ability to show test patterns. To access the menu:
•
On the menu, note that brief "help" messages are displayed to assist you with format
selection and EDID programming.
lìíéìí=jÉåì=cìåÅíáçåë
The following Output Menu functions are provided:
•
•
•
•
•
•
40
OUTPUT MENU
Format 1024x768 @ 59.94
Color Space
Press SELECT FORMAT to select
the output resolution.
DVI EDID format can be adjusted
to match the output format in
The HOME > SYSTEM > EDID menu.
SELECT
SETTINGS
FORMAT
Press { OUTPUT } on the Home Menu .
Format — sets the resolution and frame rate at which you want to drive your
projector. To minimize synchronization problems, select a frame rate that is
consistent with your input sources.
Example : If you are using 59.94 NTSC video inputs, run the output at the
same rate in order to reduce jutter artifacts.
After selecting a format with the rotary knob, press { SELECT FORMAT } to
"accept" the selection. In Appendix A, refer to the "
Resolutions " section for details on all available resolutions.
Color Space — displays the output color space, which is fixed at RGB.
Press { SAVE } to save all output settings in the output file.
Press { SELECT FORMAT } to "accept" an output format. In Appendix A, see the
" Input and Output Resolutions
Press { SETTINGS } to display the Settings Menu . Refer to the "
section on page 41 for details.
Press { TEST PATTERN } to display the Test Pattern Menu . Refer to the "
Pattern Menu " section on page 42 for details.
[ RGB ]
TEST
PATTERN
Input and Output
" section for details on available resolutions.
PresentationPRO-II • User's Guide
N
A
V
A
D
J

Settings Menu

"
Test