Table of Contents
Advertisement
6. Operations
qê~åëáíáçåáåÖ=íç=~=j~ííÉ=`çäçê
The PresentationPRO-II system enables you to transition from any BG or DSK mode to a
matte color — or from a matte color to another matte color.
Use the following steps to transition to a background matte color:
1.
2.
3.
4.
5.
6.
qê~åëáíáçåáåÖ=íç=~=iáîÉ=asf=_~ÅâÖêçìåÇ=
The PresentationPRO-II system enables you to transition from any BG or DSK mode to a
live DVI background.
Use the following steps to transition to a live DVI background:
1.
2.
3.
4.
5.
6.
qê~åëáíáçåáåÖ=íç=~=píáää=cê~ãÉ
The PresentationPRO-II system enables you to transition from any BG or DSK mode to a
still frame background — or from a still frame to another still frame.
Use the following steps to transition a still frame to Program:
1.
2.
3.
4.
PresentationPRO-II • User's Guide
Ensure that you have preset the desired transition type and rate. Refer to the
"
Working with Transitions
In the Layer Functions Section , press BG/DSK . The button blinks and the BG/
DSK Input Setup Menu appears.
On the Mode line, select BG — or simply verify that it is already selected.
Scroll to the Type line and select Matte . The current background will not change.
If you wish to set (or change) the background matte color:
~
Press { MATTE } to display the Matte Menu .
~
On the menu, adjust the Red , Green and Blue matte values as desired.
You will not see the colors change on Program.
In the Layer Functions Section , press TRANS . The TRANS button lights during
the interval, and at the conclusion of the transition, the Home Menu appears.
Ensure that you have preset the desired transition type and rate. Refer to the
"
Working with Transitions
Ensure that your DVI background is properly set up. In Chapter 5, refer to the
"
Setting up the Background
In the Layer Functions Section , press BG/DSK . The button blinks and the BG/
DSK Input Setup Menu appears.
On the Mode line, select BG — or simply verify that it is already selected.
Scroll to the Type line and select DVI . The current background will not change.
In the Layer Functions Section , press TRANS . The TRANS button lights during
the interval, and at the conclusion of the transition, the Home Menu appears.
Ensure that you have preset the desired transition type and rate. Refer to the
"
Working with Transitions
Ensure that the desired still frames have been captured. Refer to the "
Capture Overview
" section on page 117 for details.
In the Layer Functions Section , press BG/DSK . The button blinks and the BG/
DSK Input Setup Menu appears.
On the Mode line, select BG — or simply verify that it is already selected.
" section on page 115 for details.
" section on page 115 for details.
" section on page 93 for details.
" section on page 115 for details.
Working with Layers
Still Frame
109
Advertisement
Table of Contents
