Table of Contents
Advertisement
6. Operations
Working with Layers
5.
6.
hÉóáåÖ=íÜÉ=asf=ëçìêÅÉ=áå=aph=jçÇÉ
The PresentationPRO-II system enables you to transition from any BG or DSK mode to a
DSK — using the DVI input as the key source.
Use the following steps to key the live DVI source in DSK mode:
1.
2.
3.
4.
5.
6.
7.
hÉóáåÖ=~=píáää=cê~ãÉ=áå=aph=jçÇÉ
The PresentationPRO-II system enables you to transition from any BG or DSK mode to a
DSK — using a still frame as the key source. You can also change from one still frame to
another still frame.
Use the following steps to key a still frame in DSK mode:
1.
2.
3.
4.
5.
110
Scroll to the Type line and select FG_1 , FG_2 or FG_3 . The current background
will not change.
In the Layer Functions Section , press TRANS . The TRANS button lights during
the interval, and at the conclusion of the transition, the Home Menu appears.
Ensure that you have preset the desired transition type and rate. Refer to the
"
Working with Transitions
Ensure that your DVI background is properly set up. In Chapter 5, refer to the
"
Setting up the Background
In the Layer Functions Section , press BG/DSK . The button blinks and the BG/
DSK Input Setup Menu appears.
On the Mode line, select DSK — or simply verify that it is already selected.
Scroll to the Type line and select DVI . The current background will not change.
In the Layer Functions Section , press TRANS . The TRANS button lights during
the, and at the conclusion of the transition, the Home Menu appears.
Tip
Ensure that you establish the Downstream Key's initial clip,
gain and opacity parameters before your live event begins.
Modify the DSK as required. Refer to the "
on page 107 for details.
Important
When you key the DVI source in DSK mode and your PIP is
not full screen, the background matte is visible as the bottom
layer in the effect — behind the PIP. Refer to the "
Background Matte Colors in DSK Mode
page 111 for details on changing the matte color.
Ensure that you have preset the desired transition type and rate. Refer to the
"
Working with Transitions
Ensure that the desired still frames have been captured. Refer to the "
Capture Overview
" section on page 117 for details.
In the Layer Functions Section , press BG/DSK . The button blinks and the BG/
DSK Input Setup Menu appears.
On the Mode line, select DSK — or simply verify that it is already selected.
Scroll to the Type line and select FG_1 , FG_2 or FG_3 .
" section on page 115 for details.
" section on page 93 for details.
Modifying Keys and DSKs
" section on page 115 for details.
PresentationPRO-II • User's Guide
" section
Changing
" section on
Still Frame
Advertisement
Table of Contents
