Using The Barco Tab - Barco Coronis 5MP Installation & User Manual

BarcoMed control panel settings
a) Start > Settings > Control Panel > Display
b) Open the "Display Properties Control Panel" by right
c) Windows Vista: Right click in an empty area on the
2. Click on the Settings tab (The Settings tab is not present in
Vista).
3. Select the rectangle that represents the Coronis 5MP whose
settings you wish to change.
4. Click on the Advanced Settings button.
5. Select the Barco tab from the Properties screen.

Using the Barco tab

The Barco tab is divided into three sections. The first section
provides information about the graphics controller and allows
access to the graphics controller advanced configuration pages.
The second section provides information about the display. The
bottom section allows access to two Barco tools, Barco System
Report and MediCal QAWeb. Also, there is a active link to the
Barco Medical Imaging Systems web site.
60
clicking in an empty area on the desktop, then select
Properties.
desktop, select "Personalization", then click on"Display
Settings".
Single Source Master