Barco Coronis 5MP Installation & User Manual page 66

BarcoMed control panel settings
Activating a configuration profile
The Configuration Profiles list box displays a number of common
applications whose optimal configuration profile are factory-set
by default.
To activate a particular profile, select the application name from
the list and click Apply. This will add the information to the
necessary Windows registry settings. If prompted, restart
Windows.
If you subsequently experience problems with your application,
or if you want to try to optimize the performance of your system
on specific applications, modify your configuration settings
accordingly.
Adding a new application profile
Click the Add button in the Configuration Profiles section and
enter the name of the new application for which you want to set
the configuration parameters.
Modifying the configuration parameters
To change the configuration settings of a specific application,
select the name of that application from the Configuration
Profiles list box. Click the Modify button. Now select or clear the
rest of the configuration controls on this tabbed dialog to obtain
the desired display parameters for the selected application.
To remove the selected configuration profile completely, select
the name of the application from the Configuration Profiles list
box and click Delete.
You cannot delete the factory-set configuration profiles.
Note:
Click the Apply or OK button to enable your Configuration
settings.
66
Single Source Master