Barco Driver Properties - Barco Coronis 5MP Mammo Online User's Manual

Barco Driver Properties

Accessing the Barco tab
Note: You must have logged on to Windows using an account
with administrator privileges in order to use the Barco portions
of the Windows Display Control Panel to change any display
settings.
Open the Windows Display Control Panel by one of the methods
1.
below:
Start > Settings > Control Panel > Display
a)
Open the "Display Properties Control Panel" by right
b)
clicking in an empty area on the desktop, then select
Properties.
Windows Vista: Right click in an empty area on the
c)
desktop, select "Personalization", then click on"Display
Settings".
Click on the Settings tab (The Settings tab is not present in
2.
Vista).
Select the rectangle that represents the B
3.
M Display whose settings you wish to change.
AMMO
Click on the Advanced Settings button.
4.
Select the Barco tab from the Properties screen.
5.
Using the Barco tab
The Barco tab is divided into three sections. The first section provides
information about the graphics controller and allows access to the
graphics controller advanced configuration pages. The second section
provides information about the display. The bottom section allows
access to two Barco tools, Barco System Report and MediCal QAWeb.
Also, there is a active link to the Barco Medical Imaging Systems web
site.
Graphic board control panel
C 5MP
ARCO ORONIS
7