Installing the B
ARCO
5. When the driver setup is complete, click the Finish button.
6. The Barco Product Installation Wizard will now guide you
through the installation of MediCal QAWeb, BarcoMed
SelfExam, and the Barco on-line documentation.
7. When the Setup complete message appears, select Reboot
System Now and click Finish.
8. After the system reboots, Windows may display either the
Digital Signature Not Found message or The software you
are installing for this hardware has not passed Windows
logo testing.
Automated display configuration
Once the drivers, software and documentation have been
installed and your system has been rebooted, the Barco Monitor
Plug and Play Software should automatically detect your Barco
displays and attach them to the desktop with the correct
resolution. If the Barco Monitor Plug and Play Software fails to
detect your Barco displays or fails to attach them to the desktop
correctly please refer to the section, Setting the resolution of
your Barco Coronis Display in the Configuring Windows section
of this manual.
Reinstalling drivers
You can install new drivers or reinstall existing drivers at any
time by using the Barco Set-up wizard on your B
Display System Installation CD-ROM, see Installing the B
or Nio drivers and software on page 52 of this manual.
C
ORONIS
Uninstalling the drivers and software
To uninstall the Barco drivers, software or documentation for your
MFGD 5421 Systems, please use the Windows Add/Remove
Programs or Uninstall utility. This can be found in the Windows
Control Panel. For Vista use Programs & Features
54
M
C
or Nio drivers and software
ED
ORONIS
C
5MP
ARCO
ORONIS
M
ARCO
ED