Command Line (Silent) Install Of Drivers And Software - Barco Coronis 5MP Installation & User Manual

Installing the B
ARCO

Command line (Silent) Install of Drivers and Software

(Not supported with Windows Vista)
Specifying the silent install option causes most of the GUI
associated with the installer to disappear. A background progress
window will still be visible, but no user input will be required.
The silent install behavior is dictated by the SETUP.INI file. Each
application is allowed to have separate command-line
parameters for normal and silent installs.
To install the drivers and software silently, please follow the
steps below:
1. Insert the B
CD-ROM into your CD/DVD drive. When the Barco Product
Installation Wizard starts click "Cancel".
2. Click the Start button in the task bar.
3. Click Run.
4. Click Browse and
a) Browse to the root directory of the B
b) Click on the file, Setup.exe, and click Open.
or
a) Browse to the root directory of the location where you
b) Click on the file, Setup.exe, and click Open.
5. In the Open address window, place your cursor at the end of
the line of text that appears and add the following text after
Setup.exe, a space and -silent. Click OK.
Example (where D is the name of your CD/DVD drive):
50
MXRT drivers and software
C
ARCO ORONIS
Display System Installation CD-ROM.
saved the contents of your B
System Installation CD-ROM.
D:\Setup.exe -silent
5MP Display System Installation
C
ARCO ORONIS
C 5MP
ARCO ORONIS
5MP Display