Installing The B; Arco Med - Barco Coronis 3MP Installation & User Manual

Installing the B

ARCO
Note: The installation dialog will display in English if your
operating system's language is not supported.
This process applies to the following versions of Windows:
• Windows 2000 Professional,
• Windows XP Professional,
• Windows Professional x64 Edition,
• Windows Server 2003, and
• Windows Server 2003 x64 Edition.
You will need to install the B
drivers and software in the following cases:
• After you have installed the display controller(s) for your
B
ARCO
first time.
• After you have reinstalled or upgraded your operating
system.
1. Start your system. When the Found New Hardware Wizard
comes up, click Cancel. When the System Settings Change
window asks you to restart your computer, click No.
Note: Both displays connected to a single display controller
must have the same physical orientation and resolution in
order to be attached to the Windows desktop.
2. Run the Barco Product Installation Wizard.
The Barco Product Installation Wizard should start
automatically when you insert the Barco System CD-ROM
into your CD drive after the operating system has started. If
your CD drive's auto-run is not enabled or the Barco Product
Installation Wizard does not start automatically, you can run
the Barco Product Installation Wizard manually by following
these steps:
a) Click the Start button in the task bar.
b) Click Run.
M display controller drivers and software
ED
ARCO
M I D
EDICAL MAGING
M I
EDICAL MAGING
S in your system for the
ISPLAY YSTEM
D S
ISPLAY YSTEM
35