Barco Coronis 3MP Installation & User Manual page 18

BarcoMed C
ORONIS
below) using the provided DVI cable. For a dual-headed
BarcoMed C
the other connector on the display controller.
7. Replace the chassis cover, reconnect the power cord, turn on
the power, and boot the system as usual.
Running multiple BarcoMed C
The physical order of the displays may vary when you are
running multiple BarcoMed C
due to the PC's PCI bus control in the system BIOS, and not the
BarcoMed display controller. It may become necessary,
depending on how your PC's BIOS configures the PCI bus, to
switch your DVI display connections to achieve a linear desktop
configuration.
18
display controller installation
setup, connect the secondary display to
ORONIS
ORONIS
Figure 4: The Video Outputs.
display controllers in a single host
display controllers. This is
ORONIS