Barco Coronis 3MP Installation & User Manual page 65

3. Unscrew the 4 sunken screws at the rear, fixing the glass
panel and bezel.
4. Unplug the cable plugged in on the bezel.
5. Remove the bezel with glass panel.
Cleaning instructions:
• Dust, fingerprints, grease etc. can be removed by using a soft
damp cloth lightly moistened with plain water.
• Do not apply liquid directly to the LCD surface as excess liquid
may cause damage to internal electronics.
• Take care not to touch the I-guard light sensor on the LCD
panel.
Maintenance
65