Barco Coronis 3MP Installation & User Manual page 38

un-installed. This is normal, please follow the prompts from the
wizard.
Command line (Silent) Install of Drivers and Software
Specifying the silent install option causes most of the GUI
associated with the installer to disappear. A background progress
window will still be visible, but no user input will be required.
The silent install behavior is dictated by the SETUP.INI file. Each
application is allowed to have separate command-line
parameters for normal and silent installs.
To install the drivers and software silently, please follow the
steps below:
1. Insert the B
your CD/DVD drive. When the Barco Product Installation
Wizard starts click "Cancel".
2. Click the Start button in the task bar.
3. Click Run.
4. Click Browse and
a) browse to the root directory of the B
b) Click on the file, Setup.exe, and click Open.
or
a) Browse to the root directory of the location where you
b) Click on the file, Setup.exe, and click Open.
5. In the Open address window, place your cursor at the end of
the line of text that appears and add the following text after
Setup.exe, a space and -silent. Click OK.
Example (where D is the name of your CD/DVD drive):
D:\Setup.exe -silent
38
M
ARCO EDICAL
I D S
MAGING ISPLAY YSTEM
saved the contents of your B
S CD-ROM.
YSTEM
I D S
MAGING ISPLAY YSTEM
CD-ROM.
M
ARCO EDICAL
Single Source Master
CD-ROM into
M
ARCO EDICAL
I D
MAGING ISPLAY