Barco Coronis 3MP Installation & User Manual page 36

c) Click Browse and browse to the root directory of the
d) Click OK.
or
a) Browse to the root directory of the B
3. Click Next on the Welcome page.
4. Click Next on the Components to be installed page.
5. Follow the wizard's on-screen instructions to complete the
installation.
Note:
either click Next to accept the default settings or if you know
the settings required for your viewing application, you may
select them now and then click Next. You may change these
settings later by using the Barco pages of the Windows
Display Control Panel.
36
B M I
ARCO EDICAL MAGING
on the file, Setup.exe, and click Open.
I D S
MAGING ISPLAY YSTEM
file, Setup.exe.
When the page shown in figure 1 appears you may
Figure 1
Single Source Master
D S CD-ROM and click
ISPLAY YSTEM
ARCO
CD-ROM and double click on the
M
EDICAL