Avaya Interaction Center User Manual page 61

To filter queue or agent information:
1 Click the Directory button on the Avaya Agent to display the Unified Agent Directory (UAD).
2 Click View > Filter.
The Filter dialog box is displayed.
Note: If you do not see a Filter item in the UAD View menu, or if the Filter item is
not enabled, your contact center does not use this feature.
3 If you want to modify the display of the Queues tab, take the following steps:
a In the Media Type frame of the dialog box, select or de-select the types of media whose
queues you want to be displayed.
b In the Agent Type frame, select Specific Agents and then Device.
Note: This is the only selection that applies to the Queues tab. Any other selections
in this dialog box are ignored when you select Device.
c Click Apply.
4 If you want to modify the display of the Agents tab, do the following:
a Click the Media Type check boxes as desired. Agents who handle the media types that are
checked will be displayed in the Agents tab.
Using the Unified Agent Directory
Issue 1.0 June 2002 61