Conference; Ring Groups - ATCOM IPPBX IP4G Product Manual

5.7 Conference

In order to realize the conference option, the users which will attend to the conference must have
registered. Here the writer uses 6001, 6002, 6008. Now please click Conferencing  New
conference Bridge, users can see the screen like the following screenshots:
Then please click on Update button, and click on Apply Changes button in up right corner of the
main page. Here the writer configures it like the screenshots above. Then 6001 dial 6300, and
input Pin Code. Users can hear a voice promt and wait others, then you can hear the music. 6002
does the same operation. 6008 dial 6322 and input Admin PinCode. Now all the users are in the
conference. You refer to the detail in 4.14 and configure it as your need.

5.8 Ring Groups

Define Ring groups to dial more than one extension simultaneously, or to ring more than one
phone sequentially. This feature may also be called Hunt groups. Users can click Ring Groups 
New Ring Group, then users can configure it like the following screenshots. Of course 6001,
6002, 6008 have registered. Then 6008 dial 6400, you can hear 6001, 6002 are ringing
simultaneously. If users want the phones are ringing sequentially, they can configure the strategy
as Ring in Order.
www.atcom.cn 47