ATCOM IPPBX IP4G Product Manual page 26

Pin Code set an optional pin code, Ex: "1234" that must be
entered in order to access the Conference Bridge
Admin PinCode Defining this option sets a PIN for Conference
Administrators
Play music for Checking this option causes Asterisk to play Hold
the first caller Music to the first user in a conference, until another
user has joined the same conference
Close conference Close the conference bridge when the last marked
for the list caller user logs out of the conference call
exit
Enable call menu Checking this option allows a user to access the
Conference Bridge menu by pressing the *
"Asterisk" key on their dialpad
Announces Checking this option announces, to all Bridge
callers participants, the joining of any other participants
Quiet mode Do not play enter/leave sounds
Wait for marked Prevent conference participants from hearing each
user other until the marked user has joined
1.Conferencing application:
MeetMe([confno][,[options][,pin]]): Enters the user into a specified MeetMe conference
ex.: MeetMe(${EXTEN}|MsIqwxaA)
'1' — disable "you are currently the only person in this conference" message for first member
' a' — set admin mode
'A' — set marked mode
'b ' — run AGI script specified in ${MEETME_AGI_BACKGROUND}
'c' — announce user(s) count on joining a conference
'd' — dynamically add conference
'D' — dynamically add conference, prompting for a PIN
At the pin prompt, if the user does NOT want a pin assigned to the conference, they should
hit the # key.
'e' — select an empty conference
'E' — select an empty pinless conference
'F' — Pass DTMF through the conference.
'i' — announce user join/leave with review
'I' --announce user join/leave without review
'M' — enable music on hold when the conference has a single caller
'm' — set monitor only mode (Listen only, no talking)
'p' — allow user to exit the conference by pressing '#'
'P' — always prompt for the pin even if it is specified
'q' — quiet mode (don't play enter/leave sounds)
'r' — Record conference (records as ${MEETME_RECORDINGFILE} using format
${MEETME_RECORDINGFORMAT}).
's' — Present menu (user or admin) when '*' is received ('send' to menu)
't' — set talk only mode. (Talk only, no listening)
'T' — set talker detectio
'v' — video mode
www.atcom.cn
Str*
Str*
Check box unCheck
Check box unCheck
Check box unCheck
Check box unCheck
Check box unCheck
Check box unCheck
25