Table of Contents
Advertisement
Connect Power Supply; Run Preloaded
Demo
CPU/Personality Board
J12 power jack is on the underside
of the Personality board
2
Figure 3.6 Connect Personality Board to Power Supply
1. Connect the regulated 5V power supply to the appropriate power adapter. Plug the 5V
line into the J12 (5V POWER JACK) connector on the Personality board. See
3.6. Turn the 5V power supply ON.
2. The OS image pre-loaded in the 3-Stack should boot and the Windows Embedded CE
6.0 operating system should appear at the Personality board's LCD display.
i.MX27 PDK 1.0 Quick Start Guide, Rev. 1.0
Build a Demo Platform: Assemble Two Boards
1
DC
power
Build the Platform
Regulated +5V
DC Supply
Figure
23
Advertisement
Table of Contents
