Table of Contents
Advertisement
Using a USB Memory Stick
You must have a USB mini AB-to-A female connector, for connecting the USB memory
stick to the 3-Stack board.
To use the USB memory stick with the 3-Stack board, follow these steps:
1. Make sure the 3-Stack is powered and running the Windows Embedded CE 6.0 demo
image.
2. Connect the adapter to J18 USB Host connector on the Personality board, and connect
the USB memory stick to the adapter.
3. Click on the "My Device" icon in the Windows Embedded CE 6.0 desktop.
A Windows Explorer window opens, displaying the Hard Disk icon
4. Double-click the "Hard Disk" icon.
Running the Demo Applications
The applications included in the BSP are: AccTest, FMApp, CamApp, ETCHA.
The Windows Embedded CE 6.0 image pre-loaded in the 3-Stack board has the following
applications:
• The TV-Out application allows you to use a TV as a display
Figure 4.9 Viewing the Hard Disk Icon
i.MX27 PDK 1.0 Quick Start Guide, Rev. 1.0
Using the Demo Image
Running the Demo Applications
(Figure
4.9).
33
Advertisement
Table of Contents
