Build The Platform; Build A Development Platform: Assemble Three Boards - Freescale Semiconductor i.MX27 PDK 1.0 Quick Start Manual

Build the Platform

This chapter explains how to connect the three types of 3-Stack boards (Debug,
Personality, CPU) together, to make either a development platform (Personality board +
CPU board + Debug board), or a demonstration platform (Personality board + CPU
board); and how to connect the 3-Stack platform to your PC. See
Personality Board
Debug Board
CPU Board
3 Board Stack
The three 3-Stack boards in your development kit may already be assembled. If the three
boards are already assembled, review the procedures in the following sections, and be sure
to configure the Debug board appropriately.
• To build a development platform, follow the procedures in
Platform: Assemble Three Boards" on page
• To build a demonstration platform, follow the procedures in
Platform: Assemble Two Boards" on page
Build a Development Platform: Assemble
Three Boards
This section explains how to connect the Personality, Debug, and CPU boards.
Development
Configuration
Figure 3.1 3-Stack Platform Configurations
i.MX27 PDK 1.0 Quick Start Guide, Rev. 1.0
Figure
Personality Board
CPU Board
Demo
Configuration
2 Board Stack
"Build a Development
17.
"Build a Demo
21.
3
3.1.
17