System Menu - Panasonic AJ-HD150P Operating Instructions Manual

Setup menus

SYSTEM menu

<SYSTEM>
No.
00
05
06
The underline on the setting item denotes the initial setting.
Video output signal adjustments
A control matrix of the adjustments is shown below.
05: ENCODER SEL
REMOTE
<Note>
When the external
LOCAL
encoder remote controller
(AJ-ER50, option) is
used, VIDEO PHASE
and SYS PHASE of the
BOTH
encoder remote controller
will not operate.
Ext. encoder remote:
Unit:
Ext. encoder remote/Unit:
Item Setting
Superimposed Superimposed
No.
display display
WFM SEL 0000
0001
0002
0003
0004
0005
0006
0007
ENCODER 0000 REMOTE
SEL 0001
0002
V LEVEL 0000
CTRL 0001
0002
Settings
06: V LEVEL CTRL
HD
SD
BOTH
HD
SD
BOTH
HD
SD
BOTH
Ext. encoder remote adjustment only.
Setup menu adjustment only.
Simultaneous adjustment from external encoder remote and setup menu is possible
but the result of adjustment from external encoder remote will not be reflected in the
setup menu.
– 66 –
CTL This selects the signal to output from the VIDEO OUT 2
TC connector.
VIDEO 0: The CTL signal is output.
SYNC 1: The TIME CODE signal is output.
2: The VIDEO OUT signal is output.
RF-L
3: The SYNC signal is output.
RF-R
ENV-L 4: The PB L RF signal is output.
ENV-R 5: The PB R RF signal is output.
6: The PB L ENV signal is output.
7: The PB R ENV signal is output.
<Note>
1. The settings can be changed at any time regardless of the
setup menu item No. 30 (MENU LOCK) setting.
2. The signals which are output during normal playback have
approximately the levels given below.
CTL: 0.1 to 0.3 Vp-p
VIDEO: 1.0 Vp-p
This selects whether the video output signal is to be adjusted
on the VTR or with the external encoder remote control.
LOCAL
BOTH 0: Video output signals are adjusted with the external encoder
remote control.
1: Video output signals are adjusted on the VTR.
2: Each adjustment of video output signal is made from the
encoder remote controller of this unit and external
equipment.
HD The output levels can be selected when adjusting video output
SD levels from external encoder remote controller.
BOTH 0: HD video output level can be selected.
1: SD video output level can be selected.
2: HD/SD video output levels can be selected.
650: Y LVL (HD)
651: P LVL (HD)
B
652: P LVL (HD)
R
653: BK LVL (HD)
External encoder remote controller
Not adjustable
Ext. encoder remote controller
Unit
Ext. encoder remote controller/Unit
Unit
Ext. encoder remote controller/Unit
Description
TC: 0.6 Vp-p
Item adjusted
654: Y LVL (SD)
655: P LVL (SD)
B
656: P LVL (SD)
R
657: BK LVL (SD)
Not adjustable
External encoder remote controller
External encoder remote controller
Unit
Unit
Ext. encoder remote controller/Unit
Ext. encoder remote controller/Unit