B-1. Outline of SCSI-BIOS Tool
B-2. How to start up SCSI-BIOS Tool
The SCSI-BIOS Tool makes it possible to:
O Check and change the SCSI host adapter settings.
O Check the SCSI device settings which may conflict with other device
1. If Windows NT has been started up, click [Start] 5 [Shutdown] to restart
If Windows NT has not been started up, set the power to [ON].
2. When the following message appears on the screen while the PC is
starting up, press [Ctrl] + [A] on the keyboard.
Adaptec SCSI Card 39160 SCSI BIOS vX.XX
(c) 1997 Adaptec, Inc. All Rights Reserved.
222 Press <Ctrl><A> for SCSISelect(TM) Utility! 111
3. A dialog box with an underlying blue tone is opened, and the selection
screen shown below appears.
– 39 –