4-3. Checking the downloading operation
In this section, the downloading operation using the limited edition of the
editing software program is checked.
To check the downloading operation, use the clips which were already
uploaded by the digitizer and registered in the bin. (Check that the clips used
are free from noise and disturbances.)
Ensure that a cassette tape enabling test recording is already loaded in the
system's internal VTR.
Clips must be used to check the downloading operation. If the video
sequence used in section 4-2 is downloaded, it will not be recorded properly
on the tape.
When Record To Video tool is started, the screen shown below appears.
Use the Record To Video tool to check the downloading
1. Click the
Record To Video tool.
– 30 –
button from Toolbox to start the