Do these first!
This chapter explains the procedures (setup) to prepare the purchased unit for operation and
the cautions to be heeded.
1-1. Checking the accessories and attaching the stabilizer feet
Do not subject the supplied mouse, keyboard or cables to strong bumps or shocks. Doing so
could damage them.
) Power cord
) mounting screws
) Installation manual
(which you are now reading)
) Service support guide
Before proceeding with the connections, check that all the accessories shown
below are present and accounted for.
) Ferrite cores
- 4 -
When the SCSI hard disk drive for external expansion
purposes is to be connected, attach one ferrite core to
one end of the SCSI I/F cable and the other one to the
) Warranty card