Panasonic KX-TD308 Installation Manual page 258

4.1.5 Programming Example
Sample of Description
001 4.2 Manager Programming
System Speed Dialing Number Set
(19)
Conditions
• Each speed dial number has a
maximum of 24 digits. The valid
characters are 0 through 9,
keys, FLASH or FLASH/RCL,
PAUSE, SECRET and – (hyphen)
buttons.
(20)
Feature References Section 3, Features
Special Display Features
System Speed Dialing
Programming Structure
Program Address
[000] – [009]
[100] – [148]
[200] – [219]
[300] – [334]
[400] – [417]
[500] – [509]
[600] – [610]
[800] – [817]
[990] – [991]
(contd.)
and #
•
•
•
•
•
— Call Directory
Programming Group
Manager Programming
System Programming
Timer Programming
TRS / ARS Programming
Outside Line
Programming
COS Programming
Extension Programming
Resource Programming
Option Programming
Explanation
and the desired speed dial number, the selected
code is displayed.
(17) You can continue to program another entry.
(18) After you have stored all your entries, finish this
program by pressing END. After pressing END
you can go to any program address you desire.
You can return to the Initial Message mode any
time by pressing END.
To go to the next lager program address, do not
press END but press Soft 1 (SKP+) or
VOLUME .
To go to the next smaller program address, do not
press END but press SHIFT + Soft 1 (SKP-) or
VOLUME .
(19) Tells you what you should notice or consider when
doing the programming.
(20) Lists all of the features related to the
programming. These features are described in
Section 3.
Description
These programs may be accessed by the
system manager of the customer to meet
frequent changes requested by the customer.
Entire system programming.
Flexible system timer setting.
Assignment of Toll Restriction and Automatic
Route Selection (ARS).
Setting of outside line values.
Setting of Class of Service (COS).
Setting of extension values.
Assignment of customer-supplied peripherals
connected to the system.
Used to answer the user's requirements or
troubles, if needed.
System Programming 4-15