4.2
Manager Programming
Conditions
Feature References
Date and Time Set
9.
Keep pressing SELECT until the desired day of the week is
displayed.
10.
Press STORE.
11.
Press NEXT.
Display example: 12:00
12.
Enter the hour.
To change the current entry, press CLEAR and enter the new hour.
13.
Press
.
14.
Enter the minute.
To change the current entry, press CLEAR and enter the new minute.
15.
Press
.
16.
Press SELECT for AM or PM.
17.
Press
.
18.
Press SELECT for 12 or 24 (clock hour).
19.
Press STORE.
20.
Press END.
• After changing an entry, you can press STORE. You do not have
to perform the rest of the steps.
• To return to a previous field, press
13 through 18.
• If you hear an alarm after pressing STORE, check that the date is valid.
• The clock starts immediately after the STORE button is pressed.
• You cannot leave an entry empty.
• Program [990] "System Additional Information, Field (30)" is used to
enable the automatic time adjustment by Caller ID information once a
day.
Section 3, Features
Display, in Idle
(contd.)
PM 24
in steps 4 through 9 and steps
System Programming
000
4-17