4.4
Timer Programming
Description
Selection
Default
Programming
Conditions
Feature References
Dial Start Time
Sets the number of milliseconds the system waits before dialing
after an outside line is seized.
Time (milliseconds): 0 through 40 (
500 ms
1.
Enter 211.
Display: 211 DIAL START
2.
Press NEXT.
Display example: Time: 500 msec
3.
Enter the time.
To change the current entry, press CLEAR and enter the new time.
4.
Press STORE.
5.
Press END.
• You enter a number from 0 through 40. The actual time is a 100 times
your input.
• You cannot leave the entry empty.
Section 3, Features
Line Access, Automatic
Line Access, Direct
Line Access, Individual
100 is the actual time)
System Programming
211
4-71