Wall Mounting - Panasonic KX-TD308 Installation Manual

2.2.3 Wall Mounting

Mounting on Wooden Wall
1. Place the template (included) on the wall
to mark the screw positions.
Template
2. Install the screws (included) into the wall.
Drive the screw
to this position
3. Hook the main unit on the screw heads.
This set is designed for wall mounting only. The wall where the
main unit is to be mounted must be able to support the weight of
the main unit. If screws other than the ones supplied are used, use
screws with the same diameter as the ones enclosed.
Wooden
Wall
Mounting on Concrete or Mortar
Wall
1. Place the template (included) on the wall
to mark the screw positions.
2. Drill holes and drive the anchor plugs
(user-supplied) with a hammer, flush to
the wall.
To the wall surface
Anchor Plug
3. Install the screws (included) into the
anchor plugs.
Drive the screw
to this position
4. Hook the main unit on the screw heads.
Concrete Wall
6.4 mm
(1/4 inch)
29 mm
(1 1/8 inch)
Installation 2-5