Whisper Ohca - Panasonic KX-TD308 Installation Manual

3 Features
W
hisper OHCA
Description
Conditions
Calling party's
OHCA
COS mode
Disable
Enable (default)
Programming References
Feature References
Operation References
—User Manual
When attempting to call a busy extension, Whisper OHCA allows
the extension user to notify the busy party through the handset,
which will only be heard by the party. Only KX-T7400 series
telephone users can send or receive the Whisper OHCA.
• Class of Service programming determines which extensions are able to
perform this feature.
• You can select receiving Call Waiting tone, Off-Hook Call
Announcement (OHCA), Whisper OHCA or none of these at your
extension. However, the setting may change depending on each
telephone setting or the telephone type as listed below.
Called Party's Call Waiting Mode
OFF
0: Cancel 1: Call Waiting
Call Waiting disabled Call Waiting tone
Call Waiting disabled Call Waiting tone
<Example> If the user selects 3 (Whisper OHCA mode);
– If using the KX-T7436 handset..........................Whisper OHCA
– If using the KX-T7436 SP-PHONE ...................Call Waiting
– Other...................................................................Call Waiting
• The Voice Mail extension can execute only BSS irregardless of the
setting.
• If the Whisper OHCA sender does not use a KX-T7400 series
telephone, it will work as OHCA. If the receiver does not use a KX-
T7400 series telephone, it may not work properly. (E.g. the
announcement may be heard by the other party.)
Section 4, System Programming
[100] Flexible Numbering, Call waiting / OHCA / whisper OHCA
[509] Off-Hook Call Announcement (OHCA)
Section 3, Features
Busy Station Signaling (BSS)
Call Waiting
DPT Features

Whisper OHCA

ON
2: OHCA 3: Whisper OHCA
Call Waiting tone Call Waiting tone
OHCA, Whisper OHCA, OHCA,
Call Waiting tone Call Waiting tone
Off-Hook Call Announcement
(OHCA)
Features
W
3-179