800
SMDR Incoming / Outgoing Call Log Printout
Description
Selection
Default
Programming
Conditions
Feature References
4-130
System Programming
4.9
Resource Programming
Used to determine which calls will produce a Station Message
Detail Recording (SMDR) printout.
• Outgoing calls: All (all calls) / Toll (toll calls only) /
Off (no printing)
• Incoming calls: On (all calls) / Off (no printing)
Outgoing calls – All; Incoming calls – On
1.
Enter 800.
Display: 800 SMDR IN/OUT
2.
Press NEXT to program outgoing calls.
Display: Outgoing:All
3.
Keep pressing SELECT until the desired selection is
displayed.
4.
Press STORE.
5.
Press NEXT to program incoming calls.
Display: Incoming:On
6.
Keep pressing SELECT until the desired selection is
displayed.
7.
Press STORE.
8.
Press END.
• It is necessary to connect a printer to the Serial Interface (RS-232C)
port provided on the system.
• After connecting a printer, do not press the RETURN key, if provided
on the printer, within 10 seconds. Otherwise, the usage of the Serial
Interface port is changed to system programming and printing will not
occur.
• If "Toll" is selected, the system will print out all the calls starting from
the numbers stored in programs [301]–[305] "TRS Denied Code Entry
for Levels 2 through 6".
Section 3, Features
Station Message Detail Recording (SMDR)