Panasonic KX-TD308 Installation Manual page 389

990
System Additional Information
Area Field
02 (12) If Limited Call Duration is enabled in
program [502] "Extension-to-Outside Line
Call Duration Limit", assigns if Limited
Call Duration is done for both outgoing and
incoming calls or for outgoing calls only.
(13) Allows you to remove confirmation tone 4.
By default, a beep tone is emitted when a
three-party conference is started / ended.
(14) Determines if the dialed " " and "#" will be
checked by Toll Restriction. This assignment
is required for certain central offices (CO) to
prevent toll fraud. Some COs ignore the
user-dialed " " and "#". If your CO is such
a type, select "0" (no check).
(15) Unused
(16) Allows you to remove Confirmation Tone 3.
This tone is sent when a conversation is
established just after dialing the feature
number for accessing the following features:
Call Pickup, Paging, Paging Answer, Trunk
(Outside Line) Answer From Any Station
(TAFAS), Hold Retrieve and Call Park
Retrieve.
(17) An outside line set to pulse or call blocking
mode in program [402] "Dial Mode
Selection" can have two settings. This
assigns the pulse break ratio during dial
pulsing. Select an appropriate ratio
depending on the standard in your country.
(18)
Assigns if an extension's mailbox number
is substituted by the extension number or it
is programmable (free). If a call is
forwarded or rerouted to the Voice
Processing System (VPS), this system
automatically transmits the mailbox number
to the VPS to specify the user's mailbox.
To make it programmable, select "1
(free)", then assign the number in program
[609] "Voice Mail Access Codes".
4-146 System Programming
4.10 Optional Programming
Description
(contd.)
Selection Default
0 : both calls
1 : outgoing calls
only
0 : disable
1 : enable
0 : no check
1 : check
0 : disable
1 : enable
0 : 60 %
1 : 67 %
0 : extension
number
1 : free
References
0 Limited Call
Duration
1 Confirmation
Tone
1
Toll Restriction
1 Confirmation
Tone
0 Dial Type
Selection
0 Voice Mail
Integration