Mechanical Standards And Process Notes - Toyota All Models Inspection Standards Manual

MECHANICAL STANDARDS
AND PROCESS NOTES
Item
1 Hybrid battery.
2 Battery control module (battery voltage sensor).
3 Hybrid power management control module.
4 Inverter coolant level.
5 ECVT operates smoothly and properly.
6 Electric motor/generator operates properly.
7 Power inverter operates properly.
8 EV/Eco/Power modes operate properly.
9 Check transaxle "park" mechanism.
10 Multi-Information Display operates properly.
11 Touch Tracer display operates properly.
12 Hill Start Assist Control operates properly.
13 Remote air conditioner system (if equipped) operates properly.
14 Solar-powered ventilation system (if equipped) operates properly.
VIII. Hybrid Components
Criteria
19
Comments
Verify that the inverter coolant level is above the LOW level and
that the coolant is circulating (Ready Light ON, in Park, Parking
Brake ON).
Examine display screen for damage. Key ON, Ready Light ON.
Confirm that AC controls operate normally and no warning
messages are present on screen.
Mechanical Notes 10/10