Toyota All Models Inspection Standards Manual page 28

TCUV DETAILING PROCESS
PURPOSE: To remove dirt, stains and odors; make interior look as good as possible; identify any carpet, upholstery or
trim repairs that need to be done.
Procedure
1. Use compressed Move hard-to-reach dirt;
air to blow dirt from dry-brushing carpets
cracks, crevices makes vacuuming easier
and between seats;
dry-brush carpets
2. Vacuum interior, Remove all loose dirt
ashtrays, glove box, before attempting to clean
trunk carpet and all carpet and seats
trunk compartments
3. Clean headliner, Remove potential
sun visors, glove box, odor-causing dirt
ashtrays and lighter
4. Clean all vinyl and/or Remove dirt and greasy/
leather surfaces sticky film
5. Dress all vinyl areas Restore surfaces to a
except accelerator
clean, non-shiny finish
pedal, brake pedal
and steering wheel
6. Clean interior windows Provide clean, finished
using two-towel appearance
method; remove
unnecessary decals
STEP 2: INTERIOR CLEANING
Why Do This Product
• Multipurpose cleaner
well diluted
• Multipurpose cleaner
well diluted
• Water-based dressing
well diluted
• Foaming or liquid
glass cleaner
25
Equipment
• Air hose with OSHA- Do not blow
approved blow nozzle compressed air
directly into
• Safety glasses
sensitive gauges
• Rubber gloves
• Shop vacuum with Do not forget spare tire
plastic crevice tool and tool storage areas
• Towel placed over stiff Do not use solvents
bristle brush
• Towel Spray onto towel, not
directly onto surface
• Nylon brush
• Applicator pad Surface should have
non-shiny finish
• Towel
Do not use ammonia
• Two towels –
one for cleaning and cleaner on window tint
one for buffing
Tips
TCUV Detailing Process 10/10