Toyota All Models Inspection Standards Manual page 29

TCUV DETAILING PROCESS
Procedure
7. Condition leather Clean leather and restore
surfaces as required suppleness
8. Pre-spot trouble Remove stubborn stains
areas on carpet, before extracting
cloth seats, door trim
and trunk carpet with
multipurpose cleaner
and agitate with stiff
bristle brush
9. Clean carpet, cloth Hot water extractor
seats, door trim and produces cleaner and
trunk carpet using drier interiors in less time;
hot water extractor helps eliminate odors
10. Reinstall spare tire Eliminate trunk rattles
and tighten down
all equipment
STEP 2: INTERIOR CLEANING
Why Do This Product
• Leather conditioner
containing lanolin
• Multipurpose cleaner
well diluted
• Clean water only
in extractor
26
(Continued)
Equipment
• Wipe on with applicator; Do not use solvent or
buff dry with towel water-based dressings;
makes seating surfaces
slippery
Do not oversaturate
• Spray bottle
• Stiff bristle brush
• Shop vacuum
• Hot water extractor Do not use cleaners in the
extractor; cleaners are not
• Short handle stiff
necessary if pre-spotting
bristle brush
was done correctly; helps
prevent sticky residue
Do not dress spare
Tips
TCUV Detailing Process 10/10