Toyota All Models Replacement Manual

TROUBLESHOOTING

CONDITION
Bulb does not work, flickers or Check that the bulb is correctly
is dim: seated in the socket.
Check that the socket is clean.
Check that the wires have not
come loose.
Check that the bulb is intact
(no damage, no loose bulb
ends, no broken filament).
If problems persist, there could
be a fault with the vehicle's
wiring or electrical system.
Contact your Toyota Dealer
Service Department for
diagnosis and repair.

REFERENCES

Please refer to the following sources for additional information:
ACTION
• Your vehicle's Owner's Manual
• Your vehicle's Repair Manual
CAUTION
Moving parts like the fan blade and drive belts, as well as extreme
heat in the engine compartment or from the exhaust system can
result in serious injury.
• Approach with caution and care.
• Never take shortcuts when replacing parts.
• Improper servicing may damage your Toyota and lead to
personal injury.
• Unless you have proper knowledge, equipment and tools, you
should have your Toyota Dealer Service Department perform
the repairs and maintenance.

IMPORTANT SAFETY NOTICE

Proper installation of Genuine Toyota replacement parts is essential
for the safe and reliable operation of your vehicle.
Following these instructions will:
• Help to assure your personal safety
• Assist you in the proper replacement of specific parts
There are many variations in the step-by-step procedures used in
installing various parts, and varying skill levels of individuals doing
the parts replacement. These instructions cannot anticipate all
circumstances or provide advice and caution on each. If you are
in doubt concerning your ability to replace the part or have any
questions, consult your local Toyota Dealer Service Department
and have the work performed by an experienced technician.
For further assistance, contact your Toyota dealer.
Visit our Web site at www.toyota.com
M/N 00405-HOWTO-DMLMP