Toyota All Models Inspection Standards Manual page 14

MECHANICAL STANDARDS
AND PROCESS NOTES
Item
68 Check for evidence of oil gel.
69 Oil, brake, clutch, transmission, transfer case, power steering
and washer fluid at proper levels.
70 Under-hood fluids are clear and uncontaminated.
Item
71 Owner's Manual and TCUV Warranty Supplement in
dealer's possession.
72 Fuel gauge operational.
73 Battery voltage gauge operational.
74 Engine temperature gauge operational.
75 Horn operates properly.
76 Airbag(s) present with no evidence of deployment.
77 Headlights are properly aligned.
78 High and low beams operate properly.
V. Under Hood
Criteria
VI. Functional and Walkaround
Criteria
11
(Continued)
Comments
Closely examine oil pan drain plug, filler cap, oil filter and old
oil for signs of sludge and/or abuse. If symptoms exist, further
examination such as removal of oil pan and/or valve covers may
be required to confirm problem. Oil gel renders vehicle ineligible
for the TCUV program.
Do not add brake fluid now if the brake pads will be replaced. When
the caliper pistons are pushed back (to make room for new pads),
the excess fluid will damage under-hood painted surfaces. Check
ATF level with engine idling and hot, and transmission in neutral.
Comments
Airbag deployment or any signs that airbag covers have been
painted renders the vehicle permanently ineligible for certification.
Mechanical Notes 10/10