AOpen AP5TC User Manual page 55

AWARD BIOS
BIOS Features à Boot Up NumLock Status
Boot Up NumLock
Status
On
Off
BIOS Features à Boot Up System Speed
Boot Up System
Speed
High
Low
BIOS Features à Typematic Rate Setting
Typematic Rate
Setting
Enabled
Disabled
BIOS Features à Typematic Rate (Chars/Sec)
Typematic Rate
6
8
10
12
15
20
24
30
BIOS Features à Typematic Delay (Msec)
Typematic Delay
250
500
750
1000
3-8
Setting this parameter to On enables the numeric
function of the numeric keypad. Set this parameter to Off
to disregard the function. Disabling the numeric function
allows you to use the numeric keypad for cursor control.
Select High or Low system speed after boot.
Set this parameter to Enable/Disable the keyboard
repeat function. When enabled, continually holding
down a key on the keyboard will generate repeatedly
keystrokes.
This item allows you to control the speed of repeated
keystrokes. The default is 30 characters/sec.
This parameter allows you to control the delay time
between the first and the second keystroke (where the
repeated keystrokes begin).
settings are 250, 500, 750, and 1000 msec.
The typematic delay