Table of Contents
Advertisement
AWARD BIOS
Power Management à PM Controlled by APM
PM Controlled by
APM
Yes
No
Power Management à Video Off After
Video Off After
N/A
Doze
Standby
Suspend
Power Management à Break Switch
Break Switch
Enabled
Disabled
Warning: If you use toggle mode Turbo switch as
Suspend switch, be sure to push it twice to simulate
momentary mode. Otherwise the system may hang or
fail to reboot.
Power Management à Doze Mode
Doze Mode
Disabled
1 Min
2 Min
4 Min
8 Min
12 Min
20 Min
30 Min
40 Min
1 Hour
3-18
If "Max Saving" is selected, you can turn on this item,
transfer
power
management
(Advanced Power Management) and enhance power
saving function. For example, stop CPU internal
clock.
To turn off video monitor at which power down mode.
Setting this item to Enabled allows you to use the
Turbo switch as Suspend switch. Pressing the Turbo
switch changes nothings for a Pentium system, so we
usually use this switch to act as a Suspend switch.
The default value of this item is Disabled.
This item lets you set the period of time after which
the system enters into Doze mode. In this mode, the
CPU clock slows down. The ratio is specified in the
"Throttle Duty Cycle". Any activity detected returns
the system to full power.
event) is detected by monitoring the IRQ signals.
control
to
APM
The system activity (or
Advertisement
Table of Contents
