AOpen AP5TC User Manual page 54

BIOS Features à External Cache
External Cache
Enabled
Disabled
BIOS Features à Quick Power On Self Test
Quick Power on
Self test
Enable
Disabled
BIOS Features à Boot Sequence
Boot Sequence
A,C,SCSI
C,A,SCSI
C,CDROM,A
CDROM,C,A
D,A,SCSI
E,A,SCSI
F,A,SCSI
SCSI,A,C
SCSI,C,A
C only
LS/ZIP,C
BIOS Features à Swap Floppy Drive
Swap Floppy Drive
Enabled
Disabled
Enabling this parameter activates the secondary cache
(currently, PBSRAM cache).
slows down the system. Therefore, we recommend that
you leave it enabled unless you are troubleshooting a
problem.
This parameter speeds up POST by skipping some items
that are normally checked.
This parameter allows you to specify the system boot up
search sequence. The hard disk ID are listed below:
C: Primary master
D: Primary slave
E: Secondary master
F: Secondary slave
LS: LS120 drive
ZIP: IOMEGA ZIP drive
This item allows you to swap floppy drives. For example,
if you have two floppy drives (A and B), you can assign
the first drive as drive B and the second drive as drive A
or vice-versa.
AWARD BIOS
Disabling the parameter
3-7