AMX Optima Instruction Manual page 132

Appendix A – Managing Configuration Files
Multiple Signal Paths
In Optima systems, each matrix is a signal path. When you select a connector in the Virtual Matrices
view, the properties box in the right pane indicates the signal and the signal path for the connector. If the
signal has multiple signal paths (e.g., component signals), each of the signals will be displayed and each
signal path will display an appended number. In the example shown (FIG. 80), the connector for input six
contains two signal paths for an S-Video signal:


FIG. 80
Input connector properties showing two signal paths for one S-Video connector
126
S-VidV_IN_006.1 for the "Y" signal path
S-VidV_IN_006.2 for the "c" signal path
Optima Instruction Manual