AMX Optima Instruction Manual page 150

Appendix C – Advanced Configuration: Modifying Virtual Matrices
18. If applicable – If Mirror Directions was not selected in Step 12, repeat Steps 11 through 17 for the
outputs, selecting Destinations in Step 12.
19. Under Grouped Connectors, check the virtual channel assignment for each connector by selecting
the Source and Destination Channels tabs.
20. Click Accept Assignments if satisfied.
21. Load the configuring file onto the system; see page 130.
22. Using Save As (under the File menu), make a duplicate copy of the modified file with a new name
and save it to the PC. (We strongly recommend making a duplicate copy every time the file is
modified.)
Caution: The system must not be actively switching when loading this information onto the system.
144
Channels tabs
Check connector assignments
Click Accept Assignments
Optima Instruction Manual