S/Pdif And Toslink Digital Audio I/O Boards; Applicability Notice; S/Pdif Digital Audio I/O Boards Specifications - AMX Optima Instruction Manual

S/PDIF and TosLink

Applicability Notice

Y Y
C
C
FIG. 49
S/PDIF and TosLink digital audio I/O boards (shown with a Y/c board)
This chapter pertains to Optima digital audio input/output boards with S/PDIF (coaxial) and TosLink
(optical) connectors contained in pre-engineered systems and custom systems.

S/PDIF and TosLink Digital Audio I/O Boards

Note: Specifications for the following boards are listed below and on page 87.
8x8 S/PDIF (coaxial)
8x8 TosLink (optical)
8x8: 4 S/PDIF + 4 TosLink (coaxial and optical)

TosLink is a registered trademark of the Toshiba Corporation.

S/PDIF Digital Audio I/O Boards Specifications

Applies to I/O board FG1046-458 and to coaxial connectors on the combination I/O board FG1046-461.
These boards come in a number of pre-engineered systems or can be ordered individually for custom
systems.
Specifications
Resolution
Sample Rate
Input Signal Amplitude
Output Signal Amplitude
Rise and Fall Time
Jitter
CDR (Relocking)
Connector
AMX reserves the right to modify its products and their specifications without notice.
Optima Instruction Manual
®  Digital Audio I/O Boards
Y Y Y
Y Y Y
Y Y
C
C C C
C C
C C
Configuration
16 bit to 24 bit
32 kHz, 44.1 kHz, 48 kHz, 96 kHz
0.2 Vpp to 2.5 Vpp terminated
0.4 Vpp to 1.0 Vpp terminated into 75 ohm
<20 nS
<5 nS
Yes
RCA (coaxial)
S/PDIF & TosLlink
Y
Y Y Y
Y Y
C
C C C
C C
Board Part #
FG1046-458
FG1046-455
FG1046-461
®
Digital Audio I/O Boards
87