Adding I/O Boards - AMX Optima Instruction Manual

Adding I/O Boards

To add an I/O board:
1a: Insert the new board(s).
1
1b: Replace the screw(s) indicated. Tip the board unit to the left.
1a
FIG. 95
Insert new board(s) and replace screw(s)
2a: Replace the side slide-key.
2
2b: Replace the side screw.
2c. Line up the connectors on the CPU unit with the gold card edges on the board unit and push
the units together until they snap into place. Stand the CPU/board unit on its slide-key end for
Step 3.
Connectors
FIG. 96
Replace side slide-key and side screw; push board unit into place
Optima Instruction Manual
Raised circle
1b
Small hole next to screw hole will fit over small raised circle on board
2c
Appendix D – Adding or Replacing I/O Boards
Side slide-key
2a
2b
151