Sd-Sdi I/O Boards Specifications; Hd-Sdi I/O Boards Specifications - AMX Optima Instruction Manual

SD-SDI and HD-SDI Digital Video I/O Boards

SD-SDI I/O Boards Specifications

Applies to I/O boards FG1046-491 and FG1046-527.
These boards come in a number of pre-engineered systems or can be ordered individually for custom systems.
Specifications
Bit Rates
Auto Data Rate Lock
Data Type
Standard
Input Level (max.)
Input Impedance
Auto Cable Equalization
Output Level (max.)
Output Impedance
Timing Jitter
Alignment Jitter
Rise and Fall Time
CDR (Reclocking)
Connector Type
* Untested for 177 Mbps and 540 Mbps bit rates.

HD-SDI I/O Boards Specifications

Applies to I/O board FG1046-590.
This board comes in a number of pre-engineered systems or can be ordered individually for custom systems.
Specifications
Bit Rates
Auto Data Rate Lock
Data Type
Standard
Input Level (max.)
Input Impedance
Auto Cable Equalization
Output Level (max.)
Output Impedance
Timing Jitter
Alignment Jitter
CDR (Reclocking)
Connector Type
* Data not available for 177 Mbps and 540 Mbps bit rates.
** Data not available for SMPTE 372M dual link format (using two I/O boards wired in conjunction for routing dual link
HD-SDI signals).
AMX reserves the right to modify its products and their specifications without notice.
60
143 Mbps, 177 Mbps*, 270 Mbps, 360 Mbps, 540 Mbps*
Yes
8 bit or 10 bit
Conforms to SMPTE 259M, SMPTE 344M
0.8 Vpp, 10%
75 ohms
Up to 1148 ft. (350 m) of Belden 8281 or equivalent typical @ 270 Mbps
0.8 Vpp, 10%
75 ohms
<0.1 UI @ 360 Mbps
<0.1 UI @ 360 Mbps
600 ps, 100 ps (20% to 80%)
Yes
BNC
143 Mbps, 177 Mbps*, 270 Mbps, 360 Mbps, 540 Mbps*, 1.485 Gbps
Yes
8 bit or 10 bit
Conforms to SMPTE 259M, SMPTE 292M, SMPTE 344M, SMPTE 372M**
0.8 Vpp, 10%
75 ohms
Up to 328 ft. (100 m) of Belden 8281 or equivalent typical @ 1.485 Gbps
Up to 459 ft. (140 m) of Belden 1694A or equivalent typical @ 1.485 Gbps
0.8 Vpp, 10%
75 ohms
<0.1 UI @ 1.485 Gbps
<0.1 UI @ 1.485 Gbps
Yes
BNC
Optima Instruction Manual